technical data sheet calibration adaptor rpc-n 75 ? plug C f 75 ? plug P5S174-S20S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface rpc-n 75 ? according to iec 61169-16 f 75 ? according to iec 169-24 ; eia-550 documents application note an001 calibration services material and plating connector parts material plating center conductor cube gold, min. 1.27 m, over nick el outer conductor stainless steel passivated coupling nut stainless steel passivated dielectric ps
technical data sheet calibration adaptor rpc-n 75 ? plug C f 75 ? plug P5S174-S20S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data frequency dc to 4 ghz return loss 3 32 db, dc to 3 ghz 3 28 db, 3 ghz to 4 ghz mechanical data mating cycles 3 500 rpc-n 75 ? f 75 ? maximum torque 1.70 nm 6.78 nm recommended torque 1.10 nm 2.00 nm gauge 5.28 mm to 5.36 mm 0.00 mm to 0.10 mm environmental data operating temperature range 1 +20 c to +26 c rated temperature range of use 2 0 c to +50 c storage temperature range -40 c to +85 c rohs compliant 1 temperature range over which these specifications a re valid. 2 this range is underneath and above the operating te mperature range, within the open circuit is fully f unctional and could be used without damage. declaration of calibration options factory calibration standard delivery for this calibration standard inc ludes a factory calibration. the calibration certif icate issued reports individual calibration results, traceable to rosenberger standards , national / international standards are not available. model based standard d efinitions are reported in an agilent/keysight, rohde & schwarz and anritsu compatible vna format. accredited calibration not available. for further, more detailed information see applicat ion note an001 on the rosenberger homepage. calibration interval recommendation 12 months packing standard 1 pce in box weight 51.8 g/pce draft date approved date rev. engineering change n umber name date marcel panicke 04.05.15 martin moder 08.05.15 e00 14-1492 herbert babinger 08.05.15 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
